---------------------


IP (logical) addresses are assigned independently from physical (hardware) addresses. The logical address is called a 32-bit IP address, and the physical address is a 48-bit MAC address in Ethernet and token ring protocols. The delivery of a packet to a host or a router requires two levels of addressing, such as logical (IP) address and physical (MAC) addresses. When a host or a router has an IP datagram forwarding to another host or router, it must know the logical IP address of the receiver. Since the IP datagram is encapsulated in a form to be passed through the physical network (such as a LAN), the sender needs the physical MAC address of the receiver. Mapping of an IP address to a physical address can be done by either static or dynamic
mapping. Static mapping means creating a table that associates an IP address with a physical address. But static mapping has some limitations because table lookups are inefficient. As a consequence, static mapping creates a huge overhead on the network. Dynamic mapping can employ a protocol to find the other. Two protocols (ARP and RARP) have been designed to perform dynamic mapping. When a host needs to find the physical address of another host or router on its network, it sends an ARP query packet. The intended recipient recognises its IP address and sends back an ARP response which contains the recipient IP and physical addresses. An ARP request is broadcast to all devices on the network, while an ARP reply is unicast to the host requesting the mapping.


This all about the ARP - Address Resolution Protocol. How its formulation and all. Enjoy..........